Follow us on Facebook

Bottom of vessel after grit blasting

Painting of Industrial warehouse

Abrasive blasting of metal structures

Hull painting

Blue Star Diagoras after various repairs in Piraeus

Ship in dry dock

Fuel tanks

Ultra high pressure water blasting 2.500 bar

Grit blasting of metal structures

Blue Star Ferry - Drydock

High pressure blasting 1600 bar

Sand blasting of hull

Pipes transporting oil to storage tanks

Pipe lines and gas tanks

Navy vessel after superstructure painting

VLCC after very serious repairs

Sand blasting of container ship

Ships aft area after painting and drafts marking

Inspection of hull

Painting of steel building

115.00 tone oil tanker moored offshore

Crude oil tanker after various repairs on deck pipes

Tankers near the station for oil

Welding works

Green renewable energy with generator turbines

Final preparations before undocking

Oil Rig after various special Paintings

Storage tank before maintenance

Completed hull of vessel in dry dock

Technical Advisor & Project Manager

Blue Star Diagoras after external Low pressure washing & Painting


Sandblaster on duty

Spot grit blasting

High pressure blasting 1000 bar

On the right side: Chemical tank after painting

Oil well with storage tanks after painting

Industrial metal fuel tanks

Hosing down 200 bar

Fertilizer factory

Painting of cruise vessel after low pressure washing

Dynamic Co. cherry pickers

Blue Star 1 after various repairs in NEORION Syros shipyard


Submarine navy

Petrochemical industrial plant

Tanker vessel

Korean shipyard

Large fuel storage tanks

Superfast Ferries IX after various repairs and reconditionin

Tank coating

Blasting of paint for surface preparation

Oil & Gas supertanker after various repairs

High pressure water blasting

Fuel tank among maintenance

Painting of Bridge construction


Dynamic Co. uses the most sophisticated blast process equipment in the field and the most updated and variable blasting techniques available in the marine and industrial sectors up to now. Our highly trained workforce has the “know-how”, the experience and all the necessary certifications to give you the best possible service when it comes to your blasting needs.

Some of our sophisticated blasting systems include:

Micro-abrasive blasting

Micro-abrasive blasting is a dry abrasive blasting technique that works by mixing air with an abrasive medium to achieve a fine stream of abrasive onto a small part on a larger part. This blasting technique – sometimes referred to as precision sandblasting or pencil blasting – enables us to achieve advanced precision.

Wet abrasive blasting

In Dynamic Co. we choose wet abrasive blasting for the projects that necessitate extreme care, such as hazardous material or waste that need to be removed without danger (e.g. removal of asbestos, radioactive, or other poisonous products from components and structures leading to effective decontamination)

Wheel blasting

Wheel blasting is a high-power, high-efficiency blasting method used for deflashing plastic and rubber components.

Bristle Blasting

Bristle blasting is, unlike other blasting methods, a process not needing any blast media. In bristle blasting we work on the surface by using a brush-like rotary power tool made of dynamically tuned high-carbon steel wire bristles. This technique allows us to achieve simultaneous cleaning and coarsening of the surface.